87 Honda 50 not running
Moderator: Moderator
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 87 Honda 50 not running
the manual has the compression from 114 -171 chapter 3 page 8 ...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 87 Honda 50 not running
I have a little under 100 PSI, The guage im using is a POS from napa so im sure that its not giving me a accurate reading. Ill go get my good on later and try it again.
But for the good news. I got that piece out and cleaned everything up. Pilot tube you can now see through. Also, it runs like a champ.
On the note of driving it legaly. What are the rules on this bad boy? Helmet, insurance and its legal to drive?
But for the good news. I got that piece out and cleaned everything up. Pilot tube you can now see through. Also, it runs like a champ.
On the note of driving it legaly. What are the rules on this bad boy? Helmet, insurance and its legal to drive?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 87 Honda 50 not running
i dont no the laws in your state ...
when you get it on the road let us no what the top speed is????
swimmingfree
when you get it on the road let us no what the top speed is????
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 87 Honda 50 not running
My shops on a industrial road so ill rip it down the road real quick and give you a top speed.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 87 Honda 50 not running
ck to you other things
1 Also where is a good spot to source gaskets ect for this scooter?what ones do you need????
2 making it faster ????
the se50p has a 11/1 final reduction the se50 has a 10/1 final reduction .. Red Eft Performance (viewtopic.php?f=2&t=19538) sell up grad for the se50 and is a good guy to deal with there a after market pipe as well but don't have a link for that ...
hope this helps..
swimmingfree
1 Also where is a good spot to source gaskets ect for this scooter?what ones do you need????
2 making it faster ????
the se50p has a 11/1 final reduction the se50 has a 10/1 final reduction .. Red Eft Performance (viewtopic.php?f=2&t=19538) sell up grad for the se50 and is a good guy to deal with there a after market pipe as well but don't have a link for that ...
hope this helps..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 87 Honda 50 not running
Gaskets are not a issue anymore. I got all that cleared up.
I cut apart the stock exhaust looking for this "restricter" and cant find it.
I'm going to TIG together a new exhaust for this bad boy later tonight.
I cut apart the stock exhaust looking for this "restricter" and cant find it.
I'm going to TIG together a new exhaust for this bad boy later tonight.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 87 Honda 50 not running
open this up and look at the pipes ... the good pipe is bigger when it hit the muffler...
viewtopic.php?nomobile=1&f=4&t=14999
what main jet do you have in the carb??the se50p has a 82 the se50 has a 85 ..if you open up the pipe and the jet is small you will run it leen and fry the motor...
swimmingfree
viewtopic.php?nomobile=1&f=4&t=14999
what main jet do you have in the carb??the se50p has a 82 the se50 has a 85 ..if you open up the pipe and the jet is small you will run it leen and fry the motor...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 87 Honda 50 not running
Its completely stock. so im assuming the SE50p has the 82 jets. The new Carb i bought is a SE50 with the 85 jets so i should be good.
Re: 87 Honda 50 not running
Here's some pictures.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 87 Honda 50 not running
nice little scooter
so whats the top speed on it as of now???
swimmingfree
so whats the top speed on it as of now???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 87 Honda 50 not running
Its snowing, I don't think I'm taking it out haha.
Re: 87 Honda 50 not running
So a little update, I got all the parts i ordered(except the good carb). I did however get the Chinese carb and can definitively confirm that the real one is 100% beter. Some of the diffrences i found were that you needed longer bolts to mount it, The hose fittings are different sizes, the oil feed tube was not glued sealed or anything into place and the casting is just garbage. What is the same though is the carb jets and pilot tube so i swapped them over and it works nicer.
Then i started taking apart the clutch to replace it with all the parts i bought. Check out what I found already installed.
Also I took it for a ride and it hit 25mph on flat ground. That seems slow. Am I correct?
Then i started taking apart the clutch to replace it with all the parts i bought. Check out what I found already installed.
Also I took it for a ride and it hit 25mph on flat ground. That seems slow. Am I correct?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 87 Honda 50 not running
did you get a new ramp plate with the new parts?????
what is the main jet in the old girl ????
25 is about for a se50p....
swimmingfree
what is the main jet in the old girl ????
25 is about for a se50p....
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 87 Honda 50 not running
If that's the ramp plate you're using, it's the restricted one. You need the non restricted plate, then you'll see a difference.
Read this: viewtopic.php?nomobile=1&f=4&t=14999
Read this: viewtopic.php?nomobile=1&f=4&t=14999
I am a leaf on the wind. Watch how I soar.
Re: 87 Honda 50 not running
Ahhh your right.