90 jog exhaust ideas
Moderator: Moderator
-
- Noob
- Posts: 15
- Joined: Sat Nov 10, 2012 2:09 am
- Location: lower central Michigan
90 jog exhaust ideas
I have a 90 jog and I'm looking for an aftermarket exhaust to put on him. The problem is that everything that I can find is for the horizontal min, not the vertical. Performance vert min exhausts anyone?
-
- Noob
- Posts: 15
- Joined: Sat Nov 10, 2012 2:09 am
- Location: lower central Michigan
Re: 90 jog exhaust ideas
I didn't get that link. Also, I found a few between $100 and $200 for a pre'02 Zuma, but I'm not sure if they bolt onto the frame the same even though both are vert mins.
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
- Mini_Stroker305
- Goped
- Posts: 90
- Joined: Sun Mar 01, 2015 6:05 pm
- Location: Key west, FL
Re: 90 jog exhaust ideas
Yasuni makes mineralli vertical mufflers that should fit your motor. I have set up a few pre-bug zumas that have the same motor (vertical) and have worked well past my expectations. Try the Yasuni z or if you plan on going bigger with the bore, etc definitely go with the Yasuni R. Just my opinion. Spmoto like DSD has already said or try scoottunning.ca they have a variety of things for these motors.
96 Yamaha Jog Next Zone CY50
72cc Polini Evo 2
Ruima 41.4 Teflon ministroke
Yasuni C16
24mm Polini pwk
Malossi 8:1 Primary Gears
Malossi VL14 Reeds
Polini 360 Mani
Jaingwayne transmission
Michelin S1 tires 90/90/10
Hoca Racing Fan/Alternator kit
72cc Polini Evo 2
Ruima 41.4 Teflon ministroke
Yasuni C16
24mm Polini pwk
Malossi 8:1 Primary Gears
Malossi VL14 Reeds
Polini 360 Mani
Jaingwayne transmission
Michelin S1 tires 90/90/10
Hoca Racing Fan/Alternator kit
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: 90 jog exhaust ideas
I used the silent pro by technigas for my jog 90 clone engine but mine was a horizontal. I used sip scooters.
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: 90 jog exhaust ideas
Are you saying a 1990 yamaha jog? Or jog 90 meaning the bigger horizontal minarelli? If you meant 1990 yamaha jog, you will need to customize a pipe..is your engine chain driven? The old style jogss that came vertical,use a different vertical minarelli than the zuma..im pretty sure its the vertical motor used on the yamaha razz as well..which is chain drive and tops at like 30,but still has the manifold bolted straight to the cylinder,just like the zuma vertical motor
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: 90 jog exhaust ideas
This thread is old ha. I just noticed the 2013.
Re: 90 jog exhaust ideas
LOL yea, well for the record. Vertical Zuma prebug pipes do fit with a little modification (nothing more than a spacer here or there on the side mount. And, it is not the same motor as the razz. They are different the 1990 Jog is indeed variated. It uses a Jog 90(cc) variator (the 21mm drive boss not the 18mm) and regular horizontal mina Jog rear tourque driver.
92 Yamaha Jog CY50
98 Yamaha Zuma
00 Honda Elite 50SR
82 Honda MB5
90 Honda NS50F
14 Yamaha FZ-09
16 Kawasaki Versys 650
98 Yamaha Zuma
00 Honda Elite 50SR
82 Honda MB5
90 Honda NS50F
14 Yamaha FZ-09
16 Kawasaki Versys 650