AF16 whee options - split from "New Elite Build"
Moderator: Moderator
-
- Noob
- Posts: 5
- Joined: Fri May 17, 2013 5:14 pm
- Location: Indianapolis
Re: New Elite Build
what kind of wheel and hub options are available for the af16 engine? that is really my only real issue.
Re: New Elite Build
U can use a ruckus/met hub but have to use a 10" and no fattys
-
- Noob
- Posts: 5
- Joined: Fri May 17, 2013 5:14 pm
- Location: Indianapolis
AF16 wheel options
12*3?
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: New Elite Build
Greetings:
Engine case limits both width and height to 90/90x10. Maybe a very low-profile 12" tire could fit in height, but probably too wide. What is the reason for desiring big wide tire? It adversely affects handling.
Engine case limits both width and height to 90/90x10. Maybe a very low-profile 12" tire could fit in height, but probably too wide. What is the reason for desiring big wide tire? It adversely affects handling.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Noob
- Posts: 5
- Joined: Fri May 17, 2013 5:14 pm
- Location: Indianapolis
Re: New Elite Build
i am not interested in wide. i am interested in larger diameter.
Re: AF16 whee options - split from "New Elite Build"
i am running a dio style ruckus 10x3 on mine with a 90/90/10 no issues. very close though. for a larger diameter, you would need a sym engine case.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
-
- Noob
- Posts: 5
- Joined: Fri May 17, 2013 5:14 pm
- Location: Indianapolis
Re: AF16 whee options - split from "New Elite Build"
100/60/12 is just about 1/4 in larger in diameter than 90/90/10. So if you split that in half, from the axle it should be what about 1/8 in more required room. Does a 90/90/10 have an 1/8in of room between the tire and case?
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: AF16 whee options - split from "New Elite Build"
Greetings:
Installed diameter isn't the same as running diameter. A 3.50 x 10 fits, but rubs at speeds>55 MPH. Centrifugal "growth". Not sure what if any 12" rim hubs fit the splines.
Installed diameter isn't the same as running diameter. A 3.50 x 10 fits, but rubs at speeds>55 MPH. Centrifugal "growth". Not sure what if any 12" rim hubs fit the splines.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH