Hey, guys I need help with tuning my moped and getting right weights, jetting, gearings, springs, etc. Here's my set up.
- DD motor
- 72 polini corsa
- 44.4mm mini stroker
- pg long pipe
- cone air filter
- 6pcs of 7 grams weights
- 7 to 1 gearings
- 28 oko carb 135 main/50 pilot
- 1500 center spring (yellow)
- 1000 clutch spring (blue)
- 92 octone gas premix 3oz per gallon (around 40:1)
- I weight 130 pounds
It bogs at first when it's not warmed but it runs good after. It runs with temp around 300F-350F when cruising 50mph-60mph. It gets little faster than 70mph top speed but it feels like it could go faster and my temp goes around 400F when I full throttle so I stay away from doing that too much.
So guys, what can be done to make my dd better and faster? Any change in jettings, weights, gearings, springs, etc?
Some people say put 4oz per gallon (32:1) and that seems to much to me but does it run better than 3 oz per gallon?
SYM DD BULID HELP
Moderator: Moderator
-
- Noob
- Posts: 4
- Joined: Sat Aug 10, 2013 2:47 am
- Location: Honolulu
SYM DD BULID HELP
Hey, guys I need help with tuning my moped and getting right weights, jetting, gearings, springs, etc. Here's my set up.
- DD motor
- 72 polini corsa
- 44.4mm mini stroker
- pg long pipe
- cone air filter
- 6pcs of 7 grams weights
- 7 to 1 gearings
- 28 oko carb 135 main/50 pilot
- 1500 center spring (yellow)
- 1000 clutch spring (blue)
- 92 octone gas premix 3oz per gallon (around 40:1)
- I weight 130 pounds
It bogs at first when it's not warmed but it runs good after. It runs with temp around 300F-350F when cruising 50mph-60mph. It gets little faster than 70mph top speed but it feels like it could go faster and my temp goes around 400F when I full throttle so I stay away from doing that too much.
So guys, what can be done to make my dd better and faster? Any change in jettings, weights, gearings, springs, etc?
Some people say put 4oz per gallon (32:1) and that seems to much to me but does it run better than 3 oz per gallon?
- DD motor
- 72 polini corsa
- 44.4mm mini stroker
- pg long pipe
- cone air filter
- 6pcs of 7 grams weights
- 7 to 1 gearings
- 28 oko carb 135 main/50 pilot
- 1500 center spring (yellow)
- 1000 clutch spring (blue)
- 92 octone gas premix 3oz per gallon (around 40:1)
- I weight 130 pounds
It bogs at first when it's not warmed but it runs good after. It runs with temp around 300F-350F when cruising 50mph-60mph. It gets little faster than 70mph top speed but it feels like it could go faster and my temp goes around 400F when I full throttle so I stay away from doing that too much.
So guys, what can be done to make my dd better and faster? Any change in jettings, weights, gearings, springs, etc?
Some people say put 4oz per gallon (32:1) and that seems to much to me but does it run better than 3 oz per gallon?
Re: SYM DD BULID HELP
Runing same set up as me
My weights half 6g half 7g
Gearing 7.4
1500tq spring
Stock clutch
Jeting 52/145
Clip in carb in middle
Im around 115 120 im light my sym flys
I premix mine 40:1 wit one gallon gas tank
My weights half 6g half 7g
Gearing 7.4
1500tq spring
Stock clutch
Jeting 52/145
Clip in carb in middle
Im around 115 120 im light my sym flys
I premix mine 40:1 wit one gallon gas tank
Re: SYM DD BULID HELP
Do you use the choke when it is cold and thats when it bogs? Or do you not use the choke?
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
-
- Noob
- Posts: 4
- Joined: Sat Aug 10, 2013 2:47 am
- Location: Honolulu
Re: SYM DD BULID HELP
I never use choke
-
- Noob
- Posts: 4
- Joined: Sat Aug 10, 2013 2:47 am
- Location: Honolulu
Re: SYM DD BULID HELP
Really? 145 main jet? Have you tried 1500 or 2000 clutch spring? And half 7g n halg 8g weights?808army wrote:Runing same set up as me
My weights half 6g half 7g
Gearing 7.4
1500tq spring
Stock clutch
Jeting 52/145
Clip in carb in middle
Im around 115 120 im light my sym flys
I premix mine 40:1 wit one gallon gas tank
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
Re: SYM DD BULID HELP
Shouldnt bee seeing temps that high on wot. You may have a small air leak in your case or intake manifold. Also your port timing and compression might be in the wrong place because of the mini crank. Make sure your compression is between 125-135psi or your pre igniting the mixture any higher. I see alot of guys having temp problems associated with too much compression
ua mau ke 'ea o ka aina i ka pono o hawaii