My 87 Elite 50 125cc stroker Build..
Moderator: Moderator
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
My 87 Elite 50 125cc stroker Build..
Picked this up from a buddy that did not have the time or Money to finish. 561 original miles, I'm Third owner. This is my First 2-Stroke scooter build.
Engine mods so far:
1994 AF16E
Autotech355 Monster Upgrade 125cc kit.
54.00 mm bore
52.60 mm Stroke
Engine was Disassembled , Cases Machined and Reassembled by Jed's Cycles in Jerseyville,Il.
30mm Carb
Performace intake
Intake & Exhaust both have Port work..
V8 Pipe - removed the Blue and Powder coated it Gloss Black.
I'm going to run it on Premix E85
I still have to pick up a performance Clutch & Variator Kit.
Also have to get a shorter disc Break hose..
So far I have tore it down to bare frame.
I removed the Stem out of stock tripple tree.
Had an extra gy6 disc brake front end I stripped down , welded in the stock Elite stem then powder coated the tripple & forks Gloss black.
Removed and Powder coated both engine Covers and Kickstarter.
Installed new Black Seat cover.
Took the stock front wheel and Cut out the Drum hub part and made & welded in a Steel hub to mount the Brake Disc. Then Sandblasted & Powder coated both wheels White.
Then mounted New BridgeStone 2.75-10" Hoop H01 Tires
Cut the Stock Engine mount and gave it a 4" stretch.
Did away with Stock rear shock and made a solid strut mount out of 1.0" Sq Tubing.
Couple pics of Scoot when I picked it up.
Engine mods so far:
1994 AF16E
Autotech355 Monster Upgrade 125cc kit.
54.00 mm bore
52.60 mm Stroke
Engine was Disassembled , Cases Machined and Reassembled by Jed's Cycles in Jerseyville,Il.
30mm Carb
Performace intake
Intake & Exhaust both have Port work..
V8 Pipe - removed the Blue and Powder coated it Gloss Black.
I'm going to run it on Premix E85
I still have to pick up a performance Clutch & Variator Kit.
Also have to get a shorter disc Break hose..
So far I have tore it down to bare frame.
I removed the Stem out of stock tripple tree.
Had an extra gy6 disc brake front end I stripped down , welded in the stock Elite stem then powder coated the tripple & forks Gloss black.
Removed and Powder coated both engine Covers and Kickstarter.
Installed new Black Seat cover.
Took the stock front wheel and Cut out the Drum hub part and made & welded in a Steel hub to mount the Brake Disc. Then Sandblasted & Powder coated both wheels White.
Then mounted New BridgeStone 2.75-10" Hoop H01 Tires
Cut the Stock Engine mount and gave it a 4" stretch.
Did away with Stock rear shock and made a solid strut mount out of 1.0" Sq Tubing.
Couple pics of Scoot when I picked it up.
- Attachments
-
- image.jpg (75.12 KiB) Viewed 9846 times
-
- image.jpg (31.69 KiB) Viewed 9846 times
-
- image.jpg (59 KiB) Viewed 9846 times
Last edited by Hppowdercoatings on Mon May 12, 2014 5:18 pm, edited 4 times in total.
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Couple updated pics..
- Attachments
-
- image.jpg (222.66 KiB) Viewed 9843 times
-
- image.jpg (231.18 KiB) Viewed 9843 times
-
- image.jpg (232.08 KiB) Viewed 9843 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
More..
- Attachments
-
- image.jpg (232.81 KiB) Viewed 9843 times
-
- image.jpg (187.21 KiB) Viewed 9843 times
-
- image.jpg (210.56 KiB) Viewed 9843 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Couple more..
- Attachments
-
- image.jpg (245.66 KiB) Viewed 9843 times
-
- image.jpg (214.26 KiB) Viewed 9843 times
-
- image.jpg (226.42 KiB) Viewed 9843 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Couple mock-up pics .. Still need to do some paint touch ups and some more wet sanding/buffing. Just finished the Quick spray can Black paint job.
- Attachments
-
- image.jpg (198.15 KiB) Viewed 9843 times
-
- image.jpg (208.65 KiB) Viewed 9843 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Desided to lower the Front 2" so I cut the Spring/Stops..
- Attachments
-
- image.jpg (223.24 KiB) Viewed 9833 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My 87 Elite 50 125cc stroker Build..
Looking good man. Have fun.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Re: My 87 Elite 50 125cc stroker Build..
you can get e85 to get along with 2 stroke oil? i heard that they dont like to mix.
1985 spree 40qmb swapped w/bbk (in the works)
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Yes here are a couple..jareeb wrote:you can get e85 to get along with 2 stroke oil? i heard that they dont like to mix.
castor 927
Klotz techniplate
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My 87 Elite 50 125cc stroker Build..
SWEET. Nice work.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Pic of new Decals.. I have to finish wet sanding and buffing side panels then I will post pics of them.
- Attachments
-
- image.jpg (204.31 KiB) Viewed 9762 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: My 87 Elite 50 125cc stroker Build..
Greetings:
That looks Great! I really like the "49 RR". Priceless looks on motorists in traffic when I smoke... -ahem, Literally - them.
That looks Great! I really like the "49 RR". Priceless looks on motorists in traffic when I smoke... -ahem, Literally - them.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Board Supporter
- Posts: 343
- Joined: Mon Apr 28, 2014 8:55 am
- Location: Wentzville,Mo
Re: My 87 Elite 50 125cc stroker Build..
Still waiting on parts and need to finish some wiring. Finished Spray bombing the plastics and put on the New Decals..
- Attachments
-
- image.jpg (220.87 KiB) Viewed 9731 times
-
- image.jpg (228.25 KiB) Viewed 9731 times
2001 Elite 72cc...http://www.hondaspree.net/phpBB3/viewto ... =4&t=31369
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
1984 Spree "Little Evil" 125cc AF16.. http://www.hondaspree.net/phpBB3/viewto ... 16&t=31569
Re: My 87 Elite 50 125cc stroker Build..
Nice ride too bad you had to cut your inner panels.
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: My 87 Elite 50 125cc stroker Build..
Greetings:
Best-looking scooter I've seen in a while! Are you clear-coating over the decals, for the Cherry on the Parfait?
But is that a bare-nekkid cooling fan I see? I sure hope your're not running Shroudless!!
Best-looking scooter I've seen in a while! Are you clear-coating over the decals, for the Cherry on the Parfait?
But is that a bare-nekkid cooling fan I see? I sure hope your're not running Shroudless!!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH