The Ministroker!
Moderator: Moderator
The Ministroker!
We the time has come I've been collecting and selling over the last few months to build up a couple AF16 blocks I have. I'm gonna be starting with my Ruima mini stroker build. It will be Af16 case, 48mm ruima bore (I think lol), 44mm ruima ministroker crank, 24mm carb with ct mani, and a modified pg pipe. I bought this motor at the end of last summer with a bad stock crank in it I've completely dismantled it and am now finally parts ready to put it back together. I don't know much about the pipe I bought it with the motor from a member who built it. I'm not sure if it was a long or short to begin, he said he used a exhaust program to make it into a chamber style pipe. Said it ran good with it we'll see I guess I haven't tested. I've done the intake porting already and need to check the boost port as well before I assemble. But I have a few questions. For the ministroker do I just need the extra 3mm base gasket to get started? I know there will be some fine tuning to come with port timing but I'm still learning there. And can I use a paper gasket on the af16 cases like my Af05 or does it have to be a liquid gasket? Really just looking for some advise to get her ready to assemble. Also gears I'm leaning towards 8.4s or 7.58s what do you guys think? I'll be getting pics together as well just don't have them yet. Thanks ahead of time for any and all help!!!!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
- Red Eft Performance
- Elite
- Posts: 449
- Joined: Sat Jun 11, 2011 10:40 am
- Location: maine
Re: The Ministroker!
I still have a mid sized scorpion if you find the pipe doesnt work out.
Keith
Keith
Red Eft Performance
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: The Ministroker!
Thanks for the help guys! I actually have the tusk crank puller as well I just bought it knowing id have a couple cranks to install soon. I still plan on using the hot cold method to install the bearings then the puller to install the crank. Haven't used the puller yet, is it difficult at all or just line up and go? Any help there would be great. Idk if I want to spend the money to have someone else do it yet I'm gonna try my self first. And thanks Keith ill keep that in mind! And Downsouthdio I haven't started the build yet looking for some input on how to put it together first. But I do have a tester so once I get it to that point I'll be able to check.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: The Ministroker!
Oh shoot sorry thought it was together..my corsa mini was 2 base and 2 metal head gaskets..compression at 120
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
Re: The Ministroker!
Alright here's some pic of what I have so far. The top end suposed to be a ruima 75cc kit but idk no markings on it so I'll go with it. I have some digital calipers on the way as of today so I can measure. A little dirty but looks to be in good condition just needs a hone.
And here is the crank also bought used Ruima 44mm ministroke.
Here is my block only thing I've done so far is open out the intake windows, boost port to be done soon.
And here is the modified PG.
And my 24mm carb set up. What are the best kind of reeds you can get that fit the ct reed block? Without cutting your own and without buying the vforce block.
And here is the crank also bought used Ruima 44mm ministroke.
Here is my block only thing I've done so far is open out the intake windows, boost port to be done soon.
And here is the modified PG.
And my 24mm carb set up. What are the best kind of reeds you can get that fit the ct reed block? Without cutting your own and without buying the vforce block.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: The Ministroker!
Get boyesen power reeds for a kaw kx65 or Suzuki rm65. That pipe is going to be ungodly loud.
Re: The Ministroker!
Yes graphite it is the crank I got from you. And I believe you LMH idk if ill keep it but if it works out I don't really care about being a little extra loud!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: The Ministroker!
And where do you buy the boyesen reeds from? Are they a 4 pedal? The ones I'm finding look like 2 large pedal reed but they could be wrong pics.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: The Ministroker!
The reeds in the ct are 2 petal, there's just 2 reeds with 2 petals each. The kx65 reeds can probably be found on eBay
Re: The Ministroker!
Also the pipe is what most would call a drag pipe. Probably mostly top end power and no guts down low. Who knows but it'll sound real cool
- Red Eft Performance
- Elite
- Posts: 449
- Joined: Sat Jun 11, 2011 10:40 am
- Location: maine
Re: The Ministroker!
That pipe is just a PG long with the second cone turned around. I would just add a silencer and try it. should work good for your engine size.
Keith
Keith
Red Eft Performance
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
Re: The Ministroker!
Ok cool I found the reeds I'll get this ordered. And is it ok to remove the reed stoppers from the ct reed block? I've seen a couple posts here about motors eating them and I don't want to mess with that.
And red now that you say that I remember the guy I bought it from saying the same thing he cut it turned it and added the stinger said it was really long and he kept cutting it down till the performance was good. Like I said if it sucks I'll just replace it but for free I gotta at least try it out
And red now that you say that I remember the guy I bought it from saying the same thing he cut it turned it and added the stinger said it was really long and he kept cutting it down till the performance was good. Like I said if it sucks I'll just replace it but for free I gotta at least try it out
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: The Ministroker!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: The Ministroker!
good read so far
please post a ling on those reads ..
thank you ..
swimmingfree
please post a ling on those reads ..
thank you ..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet