SA50 Elite Build
Moderator: Moderator
Re: SA50 Elite Build
i tested the propane torch on the panels upper gray panels, and that did nothing. however i tested a can of the bumper black on the headset inner gray cover and it looks promising. I also hit the side panels with 220 and 400 wet. I think i'll hit those panels with the bumper black.
pics to come...
pics to come...
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: SA50 Elite Build
Slowly repainting parts.... Stripping again!
Original side-skirt hit it with propane went black, then hit it with 220 wet and the followed up with 400 wet. Will probably just hit this panel up with the bumper paint.
panel preped with gray scotchbrite pad, and soappy water. Then i used denatured alcohol to make sure the panel was free of grit and grime
sprayed with the rustoleoum bumper black stuff
Infamous rattle can paint job =P Used the Rustoleoum Automotive Paint in a can Gloss White
head set headlight cover
Original side-skirt hit it with propane went black, then hit it with 220 wet and the followed up with 400 wet. Will probably just hit this panel up with the bumper paint.
panel preped with gray scotchbrite pad, and soappy water. Then i used denatured alcohol to make sure the panel was free of grit and grime
sprayed with the rustoleoum bumper black stuff
Infamous rattle can paint job =P Used the Rustoleoum Automotive Paint in a can Gloss White
head set headlight cover
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: SA50 Elite Build
had to weld a nut on the left mirror end that was frozen in the left hand control
first attempt did not work so well, second attempt i turned the mig welder to max amps!!! (PS worked like a champ)
now it's coming together
grey/gray to black panels look so much cleaner
Last edited by dem0nk1d on Mon Sep 08, 2014 1:34 am, edited 1 time in total.
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: SA50 Elite Build
Need to get the seat redone more photos soon. Trying to get the bike to idle again. Possibly something got clogged in the carb again, possibly from the gas tank, which i cleaned out as best as possible.
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: SA50 Elite Build
Hi D. that's not bs. that sounds more like a officially certified Nigerian scamdem0nk1d wrote: California DMV and their process of pawning old fee's to the new buyer is BS. I just found out the Elite has over 500$ in back fees! Wow was a * yesterday about this. So this means at 8am this morning i will be calling the DMV and see if i can work something out over the phone. Then i might be standing inline after work again.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
-
- Elite
- Posts: 654
- Joined: Fri Mar 16, 2012 11:43 pm
- Location: Las Vegas Nv
Re: SA50 Elite Build
If you want I can reg it in az for a bit..if you have a title..I've heard it will negate the ca dmv fees ..up to you
78 Kromag. (Briton Bee) .. Under the knife.. Derbi pyramid port dual variated
78 flying dutchman.. e50 swap. mlm pipe custom tank seat.. gila kit
85 Honda spree . Af16 swap joerock mhr mini stroke scorpion pipe.
78 flying dutchman.. e50 swap. mlm pipe custom tank seat.. gila kit
85 Honda spree . Af16 swap joerock mhr mini stroke scorpion pipe.
Re: SA50 Elite Build
HI D. the scooter looks good. but it need a little color. or some stripes, numbers, ect..?
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
-
- Elite
- Posts: 654
- Joined: Fri Mar 16, 2012 11:43 pm
- Location: Las Vegas Nv
Re: SA50 Elite Build
Plus I have a couple sa 50 frames with no titles..might be cheaper swapping frames vs paying the fees
78 Kromag. (Briton Bee) .. Under the knife.. Derbi pyramid port dual variated
78 flying dutchman.. e50 swap. mlm pipe custom tank seat.. gila kit
85 Honda spree . Af16 swap joerock mhr mini stroke scorpion pipe.
78 flying dutchman.. e50 swap. mlm pipe custom tank seat.. gila kit
85 Honda spree . Af16 swap joerock mhr mini stroke scorpion pipe.
Re: SA50 Elite Build
Thanks gents for all the kind ideas. I got the original owner to sign a paper of non-op from 2002 to the present and they dropped all the penalties. I only have to pay a total of 201.00 which was more than fine with me. The 201 was back registration, new owner transfer and to put it into non-op. So i can get it built for the wife. All she needs now is the m1, to ride!!!
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: SA50 Elite Build
All done with work tonight, this is how she sits. Any thoughts or recommendation with aftermarket seat covers? I was quoted 120 to get it recovered with black marine grade vinyl red base ball stitching, and diamond stitched top.
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
Re: SA50 Elite Build
buy a used sewing machine
cut out that top, use it as a template and stitch a new top on it
cut out that top, use it as a template and stitch a new top on it
Re: SA50 Elite Build
"Like I tell people all the time Speed cost money ..if you have to ask how much then most times your not going to do it !" -tru72
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150
--\\\Projects\\--
95 Elite Restore Project for Wife
1982 Honda Passport
2013 Honda PCX 150