86 Honda spree- Minarelli Corsa- updated page 1
Moderator: Moderator
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
Re: 86 Honda spree zuma swap SPRUMA
That's a lot of rotational mass, you will lose speed but gain stability at speed. Looks real neat.
Re: 86 Honda spree zuma swap SPRUMA
what wheels are those?
1985 spree 40qmb swapped w/bbk (in the works)
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
Re: 86 Honda spree zuma swap SPRUMA
the reason i bought these is because i read that some of these clone motors are geared for 12" wheels and i could not fit the rear drum brake with the 10" tao tao rim i was using. i got lucky and found the matching set on ebay, i like these cause they resemble the 6 spoke gy6 wheels. i plan on getting race compoundish tires but for now ill rock these knobby kendas. the overall diameter isnt much more then the 10 with the bopper tire on it.
after repeatedly running out of gas and getting stranded, i hooked back up my oil tank and am using it as a second gas tank of sorts. its not ideal but it works- a nice fuel cell would be pretty sweet on this!
after repeatedly running out of gas and getting stranded, i hooked back up my oil tank and am using it as a second gas tank of sorts. its not ideal but it works- a nice fuel cell would be pretty sweet on this!
Re: 86 Honda spree zuma swap SPRUMA
i put a 1gal gas can on my little rack that i keep premixed with gas.
1985 spree 40qmb swapped w/bbk (in the works)
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: 86 Honda spree zuma swap SPRUMA
More practical for sure, looks great. Was bored and lurking on Instagram last night and heard your motor sounds great.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
Re: 86 Honda spree zuma swap SPRUMA
Thanks!! she purs like a kitten all day long!
Re: 86 Honda spree zuma swap SPRUMA
This came along very nicely.
92 Yamaha Jog CY50
98 Yamaha Zuma
00 Honda Elite 50SR
82 Honda MB5
90 Honda NS50F
14 Yamaha FZ-09
16 Kawasaki Versys 650
98 Yamaha Zuma
00 Honda Elite 50SR
82 Honda MB5
90 Honda NS50F
14 Yamaha FZ-09
16 Kawasaki Versys 650
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 86 Honda spree zuma swap SPRUMA
Greetings:
I wish you no harm, but be careful! Spree frame isn't the most robust to begin with, and a hardtail will hammer it if the pavement is rough. I could see it breaking - please ride slow.
I wish you no harm, but be careful! Spree frame isn't the most robust to begin with, and a hardtail will hammer it if the pavement is rough. I could see it breaking - please ride slow.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
Re: 86 Honda spree zuma swap SPRUMA
Thanks for the concern wheelman! ive done alot of extra bracing to insure that this bike doesnt fall apart on me. its rigid front and rear so i need all the bracing i can get!
Thanks birdman!
going to swap on my 12" front as soon as the tire gets here!
Thanks birdman!
going to swap on my 12" front as soon as the tire gets here!
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
- hothatch85
- Elite
- Posts: 410
- Joined: Fri Aug 29, 2014 12:44 pm
- Location: Rapid city SD
Re: 86 Honda spree zuma swap SPRUMA
got my 12" front wheel with a 100/60/12 on. removed the springs from the disk forks for max lowness. 220mm rotor and adelin caliper, lower budget setup but works amazing and i love it.
i gotta figure out how to get a speedo working on this thing again. when it warms up im finally gonna order a set of clone gears from SSS then ill finally be seeing 70mph