Building my first 72cc
Moderator: Moderator
-
- Noob
- Posts: 16
- Joined: Fri Jun 26, 2015 1:38 am
- Location: Hawaii
Building my first 72cc
Ok I've been riding for a while now so familiar with most parts. I only know how to do the basic bolt on and go. I now want to take it to the next level and learn what does what. I need help understanding what parts do so I can figure out the setup I want for my ride style and liking. My main questions are to start off with are what will heavier or lighter clutch do? What will stiffer or less stiff clutch springs do? What will stiffer or less stiff center spring do? What will heavier or lighter weights do? I just don't know how they all go together to get what results.. Just don't know how to combine weights and springs because don't know how they work. I have more in detail questions later but need to start off with understanding these few things. I also want to learn how to port but don't know where to start with that also? Can I get a polini corsa and measure and mark block intake ports and port it same size to bore? Same angles as stock just bigger ports to match bore? Where do I start? I know this all won't come to me by just telling me it will come with experience but that's why I want to learn and practice maybe on stock bores so I don't mess up a $200+ bore. Well hope I can get some good feedback, heard good things about this forums. Thanks guys! Hope to hear from you guys soon.
Re: Building my first 72cc
Lot of those questions have been addressed by the many 72 builders on here, but im sure ppl will chime in here and there. Try searching forum for answers.
-
- Noob
- Posts: 16
- Joined: Fri Jun 26, 2015 1:38 am
- Location: Hawaii
Re: Building my first 72cc
Thanks guys I appreciate the help. I will do some research on these forums. I have a better idea how it works. Still got lots of questions to be answered. I do know it comes with experience and trial and error so I don't expect to know right away. I will be reading up on the basics to start with. So should I leave the ports on the corsa alone so I don't mess it up? What if I port the block intake ports to match the size of the corsa ports?
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Building my first 72cc
My corsa no porting just hit 68mph last week.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: Building my first 72cc
^ this guy. See it's very obvious.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: Building my first 72cc
Codenam47? What's up? Do you need some help? Are you troubled? We can talk before you go all nuts and shoot up a movie theater.
You joined the site two months ago and here you are with all this negativity??? yikes
You joined the site two months ago and here you are with all this negativity??? yikes
Honda DIO 3 ZX Live, Malossi, WindJammah!
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: Building my first 72cc
FYI it takes a lot more work for a stock yamaha to reach 45 than you think, every single day at the shop I work on Italian minas that produce more power than a Yamaha version and getting them to 45 is a chore. It is impossible for a stock af16 with only a ramp plate to reach 55. Unless you're going down hill with a tail wind and a lot of luck that you don't over rev and lock up your stock engine. I do have a lot more experience than vast majority of people on here with a stock yamaha 3kj and a stock honda af16. A lot more experience.codename47 wrote:is this a joke or something? i dont find it funny.TinyElvis wrote:Codenam47? What's up? Do you need some help? Are you troubled? We can talk before you go all nuts and shoot up a movie theater.
You joined the site two months ago and here you are with all this negativity??? yikes :*:
graphite9 i dont listen to you anyway.
55mph was my statement as a possibility, since yamaha its possible on a stock motor. your gearing chart is off as a stock elite variator is restricted by the rmap plate like i said.
Re: Building my first 72cc
codename47 has been warned to stop the attacks.
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
Re: Building my first 72cc
Ban Hammer!
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: Building my first 72cc
Pull up the padded van. This dude is crazy! Maybe he should think, just once, that he might not know everything. And he's horse s*** at an argument.
Honda DIO 3 ZX Live, Malossi, WindJammah!
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Building my first 72cc
Greetings:
Very long posts just for argument's sake are not yet banworthy, but are getting on my last nerve, Trains. Try Twitter format.
Very long posts just for argument's sake are not yet banworthy, but are getting on my last nerve, Trains. Try Twitter format.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: Building my first 72cc
He has a detailed account of what he's done and it's done very well. Cruisingriot is an asset to the community. We all have our own way of doing things, maybe some are better at it than others and we should all get what ever we can from the good what may be.
-
- Noob
- Posts: 16
- Joined: Fri Jun 26, 2015 1:38 am
- Location: Hawaii
Re: Building my first 72cc
Lol wow my first few days here and drama already. Interesting. I've noticed already, pick and choose who I take help from. I'm going to use it for once in a while cruise around and once in a while stuntin because I love to stunt. Won't be a daily like I use to when I rode before. Just don't have "the crew" to ride daily anymore. But I have a setup I may want to try, I need some feedback on what you guys think about it. Remember I'm just learning the fine tuning and how the trans and everything works so don't throw so much negative my way if this is bad in just testing. Was a bolt on and go person.
What you think about this setup
72 polini corsa bore
24 polini or 28 keihin carb
Scorpion pipe
Malossi yellow center spring
6g weights
Polini clutch spring
Kelly pulley and ramp
8:4 gearing
What you think about this setup
72 polini corsa bore
24 polini or 28 keihin carb
Scorpion pipe
Malossi yellow center spring
6g weights
Polini clutch spring
Kelly pulley and ramp
8:4 gearing
-
- Noob
- Posts: 16
- Joined: Fri Jun 26, 2015 1:38 am
- Location: Hawaii
Re: Building my first 72cc
Lol wow my first few days here and drama already. Interesting. I've noticed already, pick and choose who I take help from. I'm going to use it for once in a while cruise around and once in a while stuntin because I love to stunt. Won't be a daily like I use to when I rode before. Just don't have "the crew" to ride daily anymore. But I have a setup I may want to try, I need some feedback on what you guys think about it. Remember I'm just learning the fine tuning and how the trans and everything works so don't throw so much negative my way if this is bad in just testing. Was a bolt on and go person.
What you think about this setup
72 polini corsa bore
24 polini or 28 keihin carb
Scorpion pipe
Malossi yellow center spring
6g weights
Polini clutch spring
Kelly pulley and ramp
8:4 gearing
What you think about this setup
72 polini corsa bore
24 polini or 28 keihin carb
Scorpion pipe
Malossi yellow center spring
6g weights
Polini clutch spring
Kelly pulley and ramp
8:4 gearing