'94 Elite Build *UPDATED*
Moderator: Moderator
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: '94 Elite Build (winter project) It's Alive!
Everyone has their own crank puller idea. Very cool way of not spending all that money on a tool used only once. So which wire should we upgrade too? I don't like the stock wire.
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: '94 Elite Build (winter project) It's Alive!
Personally I think either option from Magnecor is very good, and not expensive. Either will work fine. I currently have the high temp on there , but it doesn't really matter because the cable is out of any heat the way it is routed with the engine shrouds. For $5 you can get a couple of feet and be good to go.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: '94 Elite Build (winter project) It's Alive!
Man.... Got to do a little bit if riding and tuning today.
Anyway , here is a little GPS screen shot for you at 67.15mph
Anyway , here is a little GPS screen shot for you at 67.15mph
Last edited by johnny248 on Tue Mar 15, 2016 3:32 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: '94 Elite Build (winter project) It's Alive!
I was bored today
Last edited by johnny248 on Tue Mar 15, 2016 3:17 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: '94 Elite Build (winter project) It's Alive!
Looks good!
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: '94 Elite Build (winter project) It's Alive!
Greetings:
You did that freehand?! You are too modest about your artistic skills my friend. Great idea too! I like how you preserved the HONDA logo.
You did that freehand?! You are too modest about your artistic skills my friend. Great idea too! I like how you preserved the HONDA logo.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: '94 Elite Build (winter project) It's Alive!
Yep.
Last edited by johnny248 on Tue Mar 15, 2016 4:31 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: '94 Elite Build (winter project) It's Alive!
Greetings:
I used red nail polish to fill in the HONDA logo once a long time ago. I'd use the cover, but with the ZX transmission there are contact issues with the belt.
I used red nail polish to fill in the HONDA logo once a long time ago. I'd use the cover, but with the ZX transmission there are contact issues with the belt.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: '94 Elite Build (winter project) It's Alive!
I've read that the ZX trans requires you to cut part of the case, but I've never really seen how much larger it is. Do you think it's possible to cut the clutch cover to allow clearance?
As far as the red goes, how do you think it looked?
As far as the red goes, how do you think it looked?
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: '94 Elite Build (winter project) It's Alive!
Greetings:
I thought it looked great on the flat black. Pick a color close to your body panels.
I guess the cover can be clearanced for the ZX trans. In fact with your hole-y cover, you could see where the shaving needs to be done.
I thought it looked great on the flat black. Pick a color close to your body panels.
I guess the cover can be clearanced for the ZX trans. In fact with your hole-y cover, you could see where the shaving needs to be done.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: '94 Elite Build (winter project) It's Alive!
I finally got around to finishing my wheels
Last edited by johnny248 on Tue Mar 15, 2016 3:32 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: '94 Elite Build (winter project) It's Alive!
Nice job on the pulley cover and wheels!
Re: '94 Elite Build (winter project) It's Alive!
Thanks!
Last edited by johnny248 on Tue Mar 15, 2016 3:32 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: '94 Elite Build (winter project) It's Alive!
Things I do while being bored waiting for parts to come.
Last edited by johnny248 on Tue Mar 15, 2016 3:33 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: '94 Elite Build (winter project) It's Alive!
Pics
[
[
Last edited by johnny248 on Tue Mar 15, 2016 3:33 pm, edited 1 time in total.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~