Spree bbk issues.
Moderator: Moderator
Re: Spree bbk issues.
na i put it on right. ]
That parts diagrAM must be wrong
This one is in the manual and check mine out !
7 fins are on the right while sitting on scooter....so i installed corectly
That parts diagrAM must be wrong
This one is in the manual and check mine out !
7 fins are on the right while sitting on scooter....so i installed corectly
- Attachments
-
- 20160706_190024.jpg (175.82 KiB) Viewed 7224 times
Re: Spree bbk issues.
Yeah, guys. the overhang is to be on the fan side to aid in cooling. Parts diagram is for parts....Honda service manual is gold. Its doubtful that the Service manual shows a picture with the head on backwards. But I must admit, I did chuckle a little bit when they referred to the Glove Box as a "Grove Box" on page 11-9....
Last edited by Meatball on Wed Jul 06, 2016 7:30 pm, edited 1 time in total.
I need to find some new haters...the ones I have are starting to like me.
Re: Spree bbk issues.
Alright now that we got that crap outta the whey !
I was thinking i did it wrong....jeez
I was thinking i did it wrong....jeez
Re: Spree bbk issues.
Phew! You guys managed to raise my blood pressure for a moment there!!
Re: Spree bbk issues.
Yea mines been going up this past week too.
Re: Spree bbk issues.
Where are you guys buying your jets from? And which ones are you buying?
I need to find some new haters...the ones I have are starting to like me.
Re: Spree bbk issues.
I havent tried to source any oversize jets for the NQ50 carb. I only have the stock one and the one that came with the BBK.
Have bought a few recently for my Dio's keihin PB carb from a local supplier so might sound them out for some NQ50 jets
The trouble with living in New Zealand is that it's the wart on the elephants *... Stuff can be really hard/expensive to get
Have bought a few recently for my Dio's keihin PB carb from a local supplier so might sound them out for some NQ50 jets
The trouble with living in New Zealand is that it's the wart on the elephants *... Stuff can be really hard/expensive to get
Re: Spree bbk issues.
I need a main jet kit for my Spree. Do any of the ones on SSS fit? I have an 87 now and want bigger.
I need to find some new haters...the ones I have are starting to like me.
Re: Spree bbk issues.
Just ask SSS.... I think Taz sells them
Re: Spree bbk issues.
The reason to mix 32:1 is to make sure there is enough lub. At 50cc there is enough, maybe. Read the stock pump is 50:1. That seems too little even for 50cc. Now, at 68cc there is
even less oil. Reconnecting the pump gives more oil. Perhaps averaging about 20:1. In the way back it was common to see 16:1. using SAE 30 oil. This leads to carbon fouled plugs
and excessive carbon build up in the combustion chamber. I use24: 1 to test run to be sure everything is lubed. then switch to 32:1 when everything seems fine.
Leave the pump disconnected and use the 32:1.
even less oil. Reconnecting the pump gives more oil. Perhaps averaging about 20:1. In the way back it was common to see 16:1. using SAE 30 oil. This leads to carbon fouled plugs
and excessive carbon build up in the combustion chamber. I use24: 1 to test run to be sure everything is lubed. then switch to 32:1 when everything seems fine.
Leave the pump disconnected and use the 32:1.
A time to enjoy before the final curtain.
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree bbk issues.
Larger main jets for spree carb are available from Honda all.you do is change the last couple digits of the part number to make the jet size you want. So the 68 jet part number will end in 68, change to a 72 and that's the number for the 72 jet. Simplejakubman1 wrote:Just ask SSS.... I think Taz sells them
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree bbk issues.
The stock pump ratio is Believed to be 70:1. Lots of machines from the 80s ran really slim ratios and some ran rich oil ratios. The 84 honda odesesy ran 20:1 but the Yamaha G1 golf cart runs 150:1 injection for 84.doug9694 wrote:The reason to mix 32:1 is to make sure there is enough lub. At 50cc there is enough, maybe. Read the stock pump is 50:1. That seems too little even for 50cc. Now, at 68cc there is
even less oil. Reconnecting the pump gives more oil. Perhaps averaging about 20:1. In the way back it was common to see 16:1. using SAE 30 oil. This leads to carbon fouled plugs
and excessive carbon build up in the combustion chamber. I use24: 1 to test run to be sure everything is lubed. then switch to 32:1 when everything seems fine.
Leave the pump disconnected and use the 32:1.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- Goped
- Posts: 60
- Joined: Wed Nov 11, 2015 10:40 am
- Location: minneasota
Re: Spree bbk issues.
You are having issues because your carb is too small. Figure out how to attach a 22 mm carb
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: Spree bbk issues.
It's the intake that causes the issues, though a better carb helps too.stevespree7 wrote:You are having issues because your carb is too small. Figure out how to attach a 22 mm carb
-
- Goped
- Posts: 60
- Joined: Wed Nov 11, 2015 10:40 am
- Location: minneasota
Re: Spree bbk issues.
HOW DO I GET NE PISTON RINGS FOR THIS KIT? I DESPERATELY NEED!!! I'D EVEN GET A NEW PISTON AND RING KIT. I HAVE 3 JUGS. 2 GOOD PISTONS ... ONE SET OF RINGS. I'VE GOTTEN 3K... BUT GET A BIG CARB AND ADAPTER/INTAKE