86 Frankinspree' build.
Moderator: Moderator
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
I know it's been a minute but I'm stockpiling parts.
So far I have an exhaust. New seat cover. I need a met or ruckus rear wheel.
So far I have an exhaust. New seat cover. I need a met or ruckus rear wheel.
Last edited by SpreeorDie85 on Sun Sep 17, 2017 7:25 pm, edited 1 time in total.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
Cleaned off the AF16. The belt looks halfway nice.Come on USPS.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
Just in case anyone cares bought the elusive glovebox off eBay today.
Re: 86 Frankinspree' build.
Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.
But hey, thumbs up on the golvebox purchase!
But hey, thumbs up on the golvebox purchase!
I need to find some new haters...the ones I have are starting to like me.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
I was actually thinking of stretching the elite putting the af16 in and using sp50 engine for the Spree. I was told they fit the spree without cutting plastics and probably should have been the engine honda choose for the spree originally. Im really trying top avoid having to cut s*** up unless its necessary. Any thoughts or suggestions from fellow spree heads?Meatball wrote:Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.
But hey, thumbs up on the golvebox purchase!
Re: 86 Frankinspree' build.
The stretch mount you have would STILL need to be cut and re-welded to fit your SE50 frame. It doesnt fit either scooter frame you have. It is a bolt-in kit for 94-01 Elites....SpreeorDie85 wrote:I was actually thinking of stretching the elite putting the af16 in and using sp50 engine for the Spree.Meatball wrote:Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.
But hey, thumbs up on the golvebox purchase!
I need to find some new haters...the ones I have are starting to like me.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
Thank you sir. Never thought I would the "problem" of what motor to put in what frame lol. A very welcomed one at that. I also purchased a polini air filter pod.Meatball wrote:The stretch mount you have would STILL need to be cut and re-welded to fit your SE50 frame. It doesnt fit either scooter frame you have. It is a bolt-in kit for 94-01 Elites....SpreeorDie85 wrote:I was actually thinking of stretching the elite putting the af16 in and using sp50 engine for the Spree.Meatball wrote:Get that bad boy RUNNING! Can always add fancy handlebars later. You already need to cut/weld that stretch mount to fit the Spree frame and weld in a shock tab also.
But hey, thumbs up on the golvebox purchase!
Re: 86 Frankinspree' build.
Do you have a carb to put it on?SpreeorDie85 wrote: I also purchased a polini air filter pod.
I need to find some new haters...the ones I have are starting to like me.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
RIght now im using a stock AF16 carb but im going to wrap the tube so it doesn't run too lean, I overshot my budget so now Im just trying to the swap in and everything runningMeatball wrote:Do you have a carb to put it on?SpreeorDie85 wrote: I also purchased a polini air filter pod.
Most Recent Pics
Af16 ncy kick start.
Infamous glove box I purchased off ebay and Im pretty sure they are a member here as well.
I will say I got it extremely fast and in good shape.
Stage 6 multimeter from my spree build.
Kenda tires for the spree.
Cheap Ebay led kit (green) tacky I know. It's my build I do what I want.
Riser from SSS
It looks odd but this a horn from Supra front clip I got from my past job at the JDM engine shop. Its super loud sounds like it should be on a moving van. This was also salvaged from my old spree that was sold it my other post.
Air filter . https://www.scooterswapshop.com/product ... od-filters
Ordered this for my elite . https://www.scooterswapshop.com/product ... -taillight
Can I use my spree rear wheel or do I need a new one. I was told ruckus or metro rear wheel.
I have a stock dio exhaust some were around the casa.
Yes I know I need better breaks once its up and running.
I'm really busy with school but trying to squeeze in time to work on the Spree any chance I get.
I will say when it comes to cutting the mount and welding it I will be relying on Brandon @SSS and hondaspree.net for guidance and advice.
So please stay tuned (lol cheesy old man joke) and help a noob out.
Re: 86 Frankinspree' build.
Im out....good luck.
I need to find some new haters...the ones I have are starting to like me.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
When you want to sell that taillight, I'll give you $50 for it.
I need to find some new haters...the ones I have are starting to like me.
-
- Goped
- Posts: 78
- Joined: Wed Feb 01, 2017 8:42 pm
- Location: TEXAS
Re: 86 Frankinspree' build.
So its been a while since my last post. Ive been really busy with school with no time for the scoots I did manage to get the 86 going. Spray painted front wheel and all. All tho the Spree is slow as * compared to the Elite 50s, its so agile and nimble I feel like I can ride it a lot harder. How can you not have fun on a Spree. Even the smallest trips are an adventure.