polini corsa big bore kit
Moderator: Moderator
polini corsa big bore kit
hey ive seen 2 different polini corsa big bore kits. ive seen 72cc and 70cc. are they both pretty much the same besides for the 2cc's? i think they are relatively the same price too. i called vtcycles to see if they had any but they said they dont get them in very often, anyone know where i could get one?
2001 honda elite S
2006 kawi vulcan 1600
1996 toyota tacoma
2006 kawi vulcan 1600
1996 toyota tacoma
im not referring to the contesta kit. im only referring to the corsa. on vtcycles its listed as being 72cc. i called another hawaii shop , cycle imports of hawaii and asked if they had it. they said they did but it was 70cc. did they just think i meant the contesta? and just to verify the part number for the corsa, is it 119.0077/R ?
2001 honda elite S
2006 kawi vulcan 1600
1996 toyota tacoma
2006 kawi vulcan 1600
1996 toyota tacoma
well, some people are retarted, the corsa is a 72, so if someone calls it a 70, then whatever, its all on peoples opinions, like these bores, arent really what they seem, there usually 2 cc smaller then they say they are, like the 65cc kits for aeros and elite se50s are really 63cc kits, measured it myself plush others have measured.
-
- Spree
- Posts: 158
- Joined: Sun Jul 23, 2006 10:43 pm
- Location: Houston, Texas
It depends on the crank, the older elites with a af09 might have a shorter stroke- 87 elite,85-87 aero and the sa 88 elite Lx
But is the stroke is 41.4mm On a 94 and Up Elite S and SR,and the corsa is a 47mm piston that's 71.8cc
But I think strokeitimports.com has it listed as a 40.4 which would come out as 70.1cc ,so it all depends on the crank.
But is the stroke is 41.4mm On a 94 and Up Elite S and SR,and the corsa is a 47mm piston that's 71.8cc
But I think strokeitimports.com has it listed as a 40.4 which would come out as 70.1cc ,so it all depends on the crank.
Remember,everyone is human,even if there stupid!