Kick start install question
Moderator: Moderator
Kick start install question
Recently I tried to install a new half moon looking gear into the kick start of my honda spree. It seems as though I am missing a 3rd gear. I have the half mooned one on the plate in alignment and then the one bolted on the moped. Is there a 3rd gear that I am missing that I need in order for my kick start to work?
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Kicking In the Air
Greetings:
I will know more tonight. I'm about to swap the one-piece case cover/kicker on Flash for the nifty Dioid 2-piecer on the new Deej. Pre-reading the Service manual suggests there's a sort of cam washer with shaft splines that lives on top of the kicker, allowing it to engage in one direction but free to disengage if the engine kicks over. Sort of like a primitive Bendix. If that cam washer's missing it would explain why the gear won't spin the engine: It's freewheeling on the shaft instead.
Check the parts blowup for some idea how it all goes together. If this isn't your model (Please specify your model/year!), click the date on the Mr. Cycles page and find it.
http://www.mrcycles.com/fiche_section_d ... &fveh=3555
Bookmark that page if you want to know what part number(s) to order from there or your local dealer.
I will know more tonight. I'm about to swap the one-piece case cover/kicker on Flash for the nifty Dioid 2-piecer on the new Deej. Pre-reading the Service manual suggests there's a sort of cam washer with shaft splines that lives on top of the kicker, allowing it to engage in one direction but free to disengage if the engine kicks over. Sort of like a primitive Bendix. If that cam washer's missing it would explain why the gear won't spin the engine: It's freewheeling on the shaft instead.
Check the parts blowup for some idea how it all goes together. If this isn't your model (Please specify your model/year!), click the date on the Mr. Cycles page and find it.
http://www.mrcycles.com/fiche_section_d ... &fveh=3555
Bookmark that page if you want to know what part number(s) to order from there or your local dealer.
Last edited by Wheelman-111 on Thu Mar 19, 2009 2:35 pm, edited 1 time in total.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Its a 1986 honda spree, and to me it seems that the half moon gear should be touching another gear to get the piston gear to move but i cant seem to remember taking one out or every having one. There is another gear close to the gear that moves the piston but when you put the plate on the half moon one is no where near it. :lol:
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Post Edited.
Greetings:
See above.
See above.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Noob
- Posts: 13
- Joined: Thu Jan 22, 2009 12:34 am
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Greetings:
Do you mean this one:
http://www.mrcycles.com/fiche_section_d ... &fveh=3555
Part number depicted as #3 in the diagram is 28220-GR2-000, lists for 18 bucks and Honda-san near you should be able to order it. Otherwise use Mr.Cycles.com and pay shipping.
Do you mean this one:
http://www.mrcycles.com/fiche_section_d ... &fveh=3555
Part number depicted as #3 in the diagram is 28220-GR2-000, lists for 18 bucks and Honda-san near you should be able to order it. Otherwise use Mr.Cycles.com and pay shipping.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Noob
- Posts: 7
- Joined: Wed Mar 29, 2023 1:43 pm
Re: Kick start install question
404 not found you ancient aliens
-
- Noob
- Posts: 7
- Joined: Wed Mar 29, 2023 1:43 pm
Re: Kick start install question
2009 a simpler time…